How to replace your broken or missing necklace
The next time you go to your local jewelry store, there’s a good chance you’ll be surprised to see a replacement necklace.
There’s no one right way to do this, but here are a few tips for the uninitiated.
1.
Remove the clasp.
The easiest way to get a new necklace is to remove the clasp and pull it out.
You’ll have to bend it a little bit to make sure it fits properly, but once it’s in place, it’s all yours.2.
Cut out the pieces.
You can do this by using a sharp knife, a pair of scissors, or a small hammer.
If you can’t find a jewelry store that sells necklaces, you can buy one on Etsy.3.
Clean up the area around the necklace.
If the necklace is loose, use a razor to cut out the rough edges.
It’ll help you remove any dirt and debris.4.
Carefully remove the clasps.
You need to remove all the clamps and make sure the necklace fits properly.
You could also buy a new one, but it’s best to get the old one.5.
Care for the necklace again.
You don’t want to take your necklace off, so take it off in a clean, dry area.6.
Check out the rest of the pieces you’ll need.
Once you’ve done all that, it should look like this:7.
Clean it all up!
You’ll need:The necklacingYou can get a replacement for most necklacings on Etsy , but if you can find a decent store, you’ll want to get it in person.
You should also check out a few other online stores to find necklace replacement items.8.
Take your necklace to the jeweler.
There are a couple different types of jewelry that you can get in this class, and it depends on the style of jewelry.
If your jewelry is cheap, it might be cheaper to have a jeweler take it apart and clean it up.
If it’s expensive, you might want to ask the jewelers to do it.9.
Take the jewelry to a jewelry repair shop.
If there’s no jewelry store in your area, there are also plenty of online repair shops that specialize in necklacs.10.
Check the condition of the necklace.
This may take a few days, depending on the condition and how long it’s been in the jewelry store.
If everything is in good shape, you may want to go ahead and take the necklace to a jewelers.11.
Buy the jewelry from the jewel store.
You may want it in a special box or with an extra piece of jewelry attached.
If not, the store might have it.12.
Wear the necklace and give it a good cleaning.
The jeweler will take care of the clashing and other problems you might have.13.
Replace the necklace without the cladding.
The best option is to just take the clasher out and put it back on.
You might also want to remove it from the necklaced piece.
If all else fails, the jewel might be able to repair it.14.
Do it again!
If you have more questions, we’ve got more tips for you on how to properly remove jewelry.
Follow Adam on Twitter @adamwalsh .